Xerox DocuColor 240-250 con Xerox FreeFlow DXP250-14674 - Manual (Page 20)

Using the lp utilities Using the lp Utilities for Solaris
Paper stock
–o media=size:type:color:weight
Define the following options in order:
• Paper size = USLetter, USLegal, Tabloid, USLedger,
USStatement, a0 through a10, isob0 through isob10,
jisb0 through jisb10, or custom where a custom size is
entered as width (x) and length (y) in either inches or
millimeters. See the example below.
• Paper type = Plain, PlainDrilled, Drilled,
PlainPreCutTab , PreCutTab ,
DrilledPreCutTab , Transparency,
DrilledTransparency, DrilledFullCutTab, FullCutTab, or
a text string for a custom paper type. Modulus is
optional for a custom paper type.
For ordered paper types, enter the modulus number. If
no modulus is specified, the modulus will default to 1.
The modulus is the number of different items in a set,
for example precut tabs or rainbow paper, before the
set repeats. For example, a set of 5 precut tabs has a
modulus of 5.
• Paper color = white, clear, yellow, pink, blue, green, or
a text string excluding the colon and comma for a
custom color. The carat character (^) is not required
for a custom color string using spaces in this media
option.
• Weight = paper weight in grams per square meter
(gsm).
For example:
lp -d ps1 -o media=USLetter:PreCutTab
5:white:163
lp -d ps1 -o media=8 10:Plain:yellow:163
You may omit a value for any of these options by
entering a colon (:) to separate the field, but leave the
field value empty.
The following example shows how to specify the paper
size and color and omit the other options:
lp -d ps1 -o media=a4::blue: test.ps
The following options allow you to specify just one option
for the paper stock.
–o mediaType=
2-6