Xerox DocuColor 240-250 con Xerox FreeFlow DXP250-14674 - Manual (Page 13)

Using the lp Utilities for Solaris Installation
lpshut
This will shut down the lp print service on the DocuSP
controller.
5. Then restart the lp print service by entering the following:
/usr/lib/lpsched
Verify installation
To test this setup at the client, perform the following steps:
1. Log in as a non-root user. The following examples use cdoc
as the user account name.
2. Check the status of the queues to verify that queuing and
printing are enabled. This can be done using the following
command:
lpstat -a proofqueue
Information similar to the following is displayed:
proofqueue accepting requests since Tue May 16
12:53:14 EDT 1995
3. Submit a job by entering the following command:
lp -d proofqueue /etc/hosts
4. Enter the following command to verify that the print job
reached the queue:
lpstat -u cdoc
Replace cdoc in the above example with the user account
name that was used to submit the print job. Information
similar to the following is displayed:
proofqueue-80
cdoc 56638 Jul 22 14:35
1-5