Arcam AV8 - Manual (Page 29)

E-28
E-28
E-29
E
n
g
li
sh
Unable to adjust bass and treble controls:
Bass and treble is not available in THX mode. For Analogue Stereo and
Digital Stereo modes, check that the ‘Auto Stereo Tone Bypass’ line of
‘Speaker Eq’ in the Setup Menu is set to
No.
Unable to adjust balance control:
Balance is not available in THX mode.
Digital signal drops out when other electrical appliances
turn on (heating, fridge, freezer, etc.):
If a poor quality or incorrect type of cable has been used for the digital
inputs, they can pick up electrical noise. Change the cable to a 75Ω low
loss coaxial type.
Check the connections have not oxidised. Clean the connectors with
contact cleaner if they appear oxidised.