Konica Minolta PagePro 1350EN - Manual (Page 86)

Configuring the Printer 79
General Paper Time
Out The printer automatically enters a “paper
timeout” standby state when the paper
specified for a specific tray from the driver
does not match the paper loaded in the
tray. Use this setting to specify what the
printer should do after it enters the paper
timeout state.
If Proceed is selected, the printer will pro-
ceed with the job using paper from the
specified source.
If Clear is selected, the printer will cancel
the current print job.
If None is selected, the printer will do
nothing and will wait until paper is fed
manually or until it receives a command to
cancel the current print job. Printing
resumes when the Cancel Button on the
printer’s control panel is pressed.
Detect Size
Error A size error occurs when the actual paper
size is different from the paper size speci-
fied from the printer driver.
If On is selected, the printer will detect
size errors.
If Off is selected, paper size error detec-
tion is turned off.
Apply button Applies the configuration settings for this
window.
Clear button Resets all configuration settings to previ-
ous values.
Log out button Logs out of Administrator Mode and
returns to User Mode.
Item Description