Installing crown print monitor+ for windows 9x, Installing the tcp/ip protocol for windows nt 4.0 – Konica Minolta PagePro 1350EN User Manual
Page 34
Installing missing network components
27
Installing Crown Print Monitor+ for Windows 9X
If you receive a warning that Crown Print Monitor+ is not installed while
attempting a Network Installation of the printer, please first install Crown Print
Monitor+ as follows:
1
Cancel the PCL6 Driver Setup program.
2
Exit the CD-ROM Installer.
3
Browse to the \Utilities\Crown Print Monitor directory of your CD-ROM
and run SETUP.EXE to proceed with the Crown Print Monitor+ installa-
tion.
4
You only need to install Crown Print Monitor+ and can cancel the Port cre-
ation, since this will be done by the PCL6 driver Setup.
5
Once completed, resume the PCL6 Driver Setup.
"
Please refer to the Crown Print Monitor+ Administrator's Guide
located in the \manuals\english directory of your CD-ROM as print-
mon.pdf for full instructions on how to install Crown Print Monitor+ on
your computer.
Installing the TCP/IP Protocol for Windows NT 4.0
If you receive a warning that TCP/IP Protocol is not installed while attempting
a Network Installation of the printer, please first install TCP/IP Protocol as fol-
lows:
1
Cancel the PCL6 Driver Setup program.
2
Exit the CD-ROM Installer.
3
Insert your Microsoft Windows NT4 CD-ROM in your CD-ROM Station.