Konica Minolta PagePro 1350EN - Manual (Page 32)

Installing missing network components 25
Installing missing network components
During installation the PCL6 Driver Setup will check that that all necessary
network components are installed on your computer. If it was not the case,
you would receive a warning message such as following:
In such a case, cancel the current installation and check the following sec-
tions for instructions on how to install the missing component. Once the miss-
ing component has been installed, you can resume the PCL6 Driver Setup.
Installing Internet Explorer 6.0 or above for Windows 9X,
Windows NT4.0, or Windows Server 2003/XP/2000
If you receive a warning that Internet Explorer version 6.0 or above is not
installed while attempting a Network Installation of the printer, please first
install the latest version of Microsoft Internet Explorer as follows:
1
Cancel the PCL6 Driver Setup program.
2
Exit the CD-ROM Installer.
3
Download the latest version of Microsoft Internet Explorer from Microsoft
Website and install on your computer.
4
Once completed, resume the PCL6 Driver Setup.
"
Please refer to Microsoft documentation for full instructions on how to
install Internet Explorer on your computer.
Installing TCP/IP for Windows 9X
If you receive a warning that TCP/IP is not installed while attempting a Net-
work Installation of the printer, please first install TCP/IP as follows:
1
Cancel the PCL6 Driver Setup program.
2
Exit the CD-ROM Installer.
3
Insert Your Microsoft Windows 98/ME in your CD-ROM Station.