Konica Minolta bizhub C300 User Manual

Page 81

Administrator Operations

2-62

C300

minist

r Op

ions

Chapter 2

What happens when HDD Format is executed?

Executing HDD Format erases data in the HDD. It is recommended
that important data be saved in a backup medium in advance. Ex-
ecution of HDD Format will also reset the setting values of different
functions to the default values. Set the Enhanced Security mode to
[ON] again. For the functions whose settings are reset to the default
values, see “Items cleared by HDD Format” on page 2-11.

Make sure that a message appears prompting you to turn OFF and
then ON the main power switch. Now, turn OFF and then turn ON the
main power switch.

–

To make the setting of [Encryption Priority] or [Overwrite Priority],
go to step 14.

What is the difference between Encryption Priority and Overwrite
Priority?

[Encryption Priority] refers to writing of data in HDD with an en-
hanced encryption strength. It is recommended that [Encryption
Priority] be selected to achieve a greater effect of encryption.

[Overwrite Priority] refers to writing of data in HDD through the stan-
dard encryption technique.

[Encryption Priority] is the default setting.

Call the HDD Setting menu to the screen from the control panel.

–

For the procedure to call the HDD Setting menu to the screen, see
step 1 of “Setting the Encryption Key (encryption word)” on
page 2-58.

c300_security_E.book 62 ページ２００７年４月１１日　水曜日　午前１０時４２分