Konica Minolta bizhub C300 - Manual (Page 183)

4 Application Software
4-28 C300
Application Software
Chapter 4
4.4 HDD TWAIN driver
The HDD TWAIN driver, which is to be installed in the PC of a general user,
is a TWAIN driver used exclusively for allowing the HDD of this machine to
be recognized as a TWAIN device.
The HDD TWAIN driver is a utility function for downloading document data
stored in the User Box in the scan or fax mode in the image processing ap-
plication of the PC.
When an attempt is made to gain access to the machine through the HDD
TWAIN driver, the user is authenticated to be an authorized user by using an
8-to-64-digit User Password and an 8-digit User Box Password. During the
authentication procedure, the User Password entered for the authentication
purpose appears as “*” on the display. When the Enhanced Security mode
is set to [ON], the number of times in which authentication fails is counted.
2
Note
Do not leave the site while you are gaining access to the machine through
the HDD TWAIN driver. If it is absolutely necessary to leave the site, be
sure first to log off from the HDD TWAIN driver.
2
Reminder
If [ON (External Server)] (Active Directory) is set for the authentication
method and if user authentication is successful, the User Name not reg-
istered in the machine is automatically registered.
4.4.1 Accessing from the HDD TWAIN driver
< From the PC>
1
Start the image processing application.
2
From the [File] menu, click [Read], and then select [KONICA MINOLTA
HDD TWAIN Ver.2].
c300_security_E.book 28 ページ ２００７年４月１１日 水曜日 午前１０時４２分