Konica Minolta bizhub C300 - Manual (Page 117)

3 User Operations
3-6 C300
Use
r Op
er
at
ions
Chapter 3
1
Start the Web browser.
2
Enter the IP address of the machine in the address bar.
3
Press the [Enter] key to start PageScope Web Connection.
4
Click the Registered User radio button and enter the User Name and
User Password.
5
Click the [Login].
? What if a wrong User Name or User Password is entered?
% If there is a mismatch of User Password relative to the registered
User Name, a message appears that tells that authentication has
not been successful. Click [OK] to go back to the screen of step 4.
Enter the correct User Name and User Password.
% If the Enhanced Security mode is set to [ON], the entry of a wrong
User Password is counted as unauthorized access. If a wrong User
Password for the corresponding User Name entered is entered a
predetermined number of times (once to three times) set by the Ad-
ministrator of the machine or more, a message appears that tells
that authentication has not been successful for any subsequent op-
eration for authentication. The machine is then set into an access
lock state, rejecting any more logon attempts. To cancel the access
lock state, the Administrator of the machine must perform the Re-
lease Setting. Contact the Administrator of the machine.
c300_security_E.book 6 ページ ２００７年４月１１日 水曜日 午前１０時４２分