Konica Minolta bizhub C300 - Manual (Page 126)

User Operations 3
C300 3-15
Use
r Op
er
at
ions
Chapter 3
3.3.1 Accessing the Secure Print
2
Note
Do not leave the machine while you are in the user operation mode. If it
is absolutely necessary to leave the machine, be sure first to log off from
the user operation mode.
For the Secure Print ID, enter the one that has been set on the printer
driver side.
If a wrong Secure Print ID is entered, the target Secure Print Document
will not be displayed. Enter the correct Secure Print ID.
For the Secure Print Password, enter the 8-digit one set on the printer
driver side.
The machine rejects any Secure Print Password that consists of less than
8 digits.
0 For the logon procedure, see “Performing user authentication” on
page 3-2.
1
Log on to the user operation mode through User Authentication from
the control panel.
2
Press the [Box] key.
3
Touch [System User Box] tab.
c300_security_E.book 15 ページ ２００７年４月１１日 水曜日 午前１０時４２分