Konica Minolta bizhub C300 - Manual (Page 173)

4 Application Software
4-18 C300
Application Software
Chapter 4
7
Enter the User Box Password.
? What precautions should be used when entering the User Box
Password in each of the different password boxes?
% In the “Current password” box, enter the currently set User Box
Password.
% If Public is to be set for User Box Type, a password that meets the
requirements of the Password Rules must be entered in the “New
Password” box. For details of the Password Rules, see “Password
Rules” on page 1-11.
% In the “Confirm new password” box, enter the same User Box
Password as that entered in the “New password” box.
8
Click the [OK].
? What steps should be performed to change the owner of the User
Box?
% When the owner of the User Box is to be changed, enter the User
Name registered in the machine as an authorized user of the ma-
chine in the Owner Name.
2
Note
If there is a mismatch in the Current Password, a message appears that
warns that there is a mismatch in the User Box Password. Click [OK] and
perform steps 7 and 8 again.
If the User Box Password entered does not meet the requirements of the
Password Rules with “Public” selected for User Box Type, a message ap-
pears that tells that the User Box Password entered cannot be used.
c300_security_E.book 18 ページ ２００７年４月１１日 水曜日 午前１０時４２分