Konica Minolta bizhub C300 User Manual
Page 187
4
Application Software
4-32
C300
Application Software
Chapter 4
2
Select the “Use User Authentication” check box and the “Recipient Us-
er” radio button.
3
Enter the User Name and the 8-to-64-digit User Password that have
been registered in the machine.
?
What steps must be performed if ON (External Server) is set for the
authentication method and two or more external servers are in-
stalled?
%
If [ON (External Server)] is set for the authentication method and
two or more external servers are installed, enter “@domain name”
following the User Name so as to identify the specific server that
validates the user’s authentication. For details, ask the Administra-
tor of the machine.
4
Click the [OK].
2
Note
If there is a mismatch between the User Password entered and the User
Name registered, the specified file is erased as an error from the machine
without being printed.
If the Enhanced Security mode is set to [ON], the entry of a wrong User
Password is counted as unauthorized access. If a wrong User Password
is entered a predetermined number of times (once to three times) set by
the Administrator of the machine or more, the machine is then set into an
access lock state, rejecting any more logon attempts. To cancel the ac-
cess lock state, the Administrator of the machine must perform the Re-
lease Setting. Contact the Administrator of the machine.
c300_security_E.book 32 ページ 2007年4月11日 水曜日 午前10時42分