beautypg.com

Konica Minolta bizhub C451 User Manual

Page 96

background image

User mode

2

C451

2-61

If “Fax” was selected

Item

Description

No.

Displays the registration number.

Name

Type in the name of the program (up to 24 characters).

Destination Information

Specify the destination.
Select “Select from Address Book” or “Direct Input”. To select
a destination from the address book, click the [Search from List]
button, and then select from the list of address book destina-
tions. An address book destination can also be searched for us-
ing its number or index characters. To check the transmission
destinations, click the [Check Destination] button.
If “Direct Input” is selected, type in the address (up to 38 char-
acters, including only numerals, #, *, T, P and E). Click the [Dis-
play] button beside “Communication Setting”, and then select
the communication setting (“V34 Off”, “ECM Off”, “International
Communication”, “Check Destination”). If the optional fax multi
line is installed, the line can be selected.

Resolution

Select the resolution.

File Type

Select the file format.

Simplex/Duplex

Select “1-Sided”, “2-Sided” or “Cover Sheet + 2-Sided”.

Original Type

Select the document quality, such as text or photo.

Separate Scan

Select either “ON” or “OFF”.

Density

Select the density.

Background Removal

Adjust the density of the background.

Scan Size

Select the document size (“Auto”, “Standard Size” or “Custom
Size”).
If “Standard Size” is selected, select the size and the feed direc-
tion.
If “Custom Size” is selected, specify the height and width.

Application Setting

Click the [Display] button, and then specify settings for the func-
tions that are displayed.

Timer TX

Select whether or not to enable timer transmission. If “ON” is
selected, specify the time.

Password TX

Select whether or not to enable password transmission. If “ON”
is selected, specify the password.

F-Code

Select whether or not to enable F-codes. If “Enable” is selected,
type in the SUB address and password.

2-Sided Binding Direction

Select the position of the document binding margin.

Special Original

Select “Normal”, “Mixed Original”, “Z-Folded Original” or “Long
Original” as the setting for the loaded document.

Book Scan

Specify whether to perform book scan.
To specify this item, select settings for the scanning method
and center erasing. If any setting other than “Book Spread” is
selected for the scanning method, select the binding direction.

Erase

Specify whether to perform frame erase.
To specify this item, specify the width that is erased on all sides
of the document (“Top”, “Bottom”, “Left” and “Right”).