Konica Minolta bizhub C451 - Manual (Page 228)

Administrator mode 3
C451 3-119
OpenAPI Setting
Specify the OpenAPI settings. To synchronize this machine with a different
OpenAPI-based system, specify settings for OpenAPI.
2
Note
If “Enhanced Security Mode” is set to enable, the “Use SSL/TLS” check
box is selected.
If authentication is performed with PageScope Authentication Manager,
specify the SSL/TLS settings, and then enable the SSL/TLS settings of
the OpenAPI settings.
If authentication is performed with PageScope Authentication Manager
from the printer driver, set “Authentication” for OpenAPI Settings to
“OFF” from the control panel.
Item Description
Port Number Type in the port number. (Range: 1 to 65535)
Use SSL/TLS and Port
No. (SSL) Select whether or not SSL/TLS is used. To use SSL/TLS, select the
check box, and then type in the port number. (Range: 1 to 65535)