Konica Minolta bizhub C451 - Manual (Page 192)

Administrator mode 3
C451 3-83
TCP/IP Setting - IP Filtering
Specify the settings for IP address filtering.
Access limitations can be set by specifying the IP address of the host.
!
Detail
Permitting (denying) a single IP address can be specified in any of the fol-
lowing ways.
Type in the IP address as the starting address, and then type “0.0.0.0” as
the ending address (for example, “192.168.11.22 – 0.0.0.0”).
Type “0.0.0.0” as the starting address, and then type in the IP address as
the ending address (for example, “0.0.0.0 – 192.168.11.22”).
Type in the same address as the starting address and as the ending ad-
dress (for example, “192.168.11.22 – 192.168.11.22”).
Item Description
Permit Access Select whether or not to specify permitted address settings.
Set 1 to 5 Type in the permitted addresses. (Format: ***.***.***.***; Range for ***: 0 to
255)
Deny Access Select whether or not to specify denied address settings.
Set 1 to 5 Type in the denied addresses. (Format: ***.***.***.***; Range for ***: 0 to 255)