Konica Minolta bizhub C451 - Manual (Page 122)

Administrator mode 3
C451 3-13
Date/Time Setting - Time Adjustment Setting
Select whether the date and time of the machine can be adjusted through
passive acquisition from the NTP server.
!
Detail
In order to specify the settings on the Time Adjustment Setting page, the
time zone must first be specified. For details, refer to “Date/Time Setting
- Manual Setting” on page 3-12.
Item Description
Time Adjustment Setting Select whether or not the time is automatically adjusted with NTP.
NTP Server Address Type in the NTP server address.
To type in the host name, select the “Please check to enter host
name.” check box. If the machine is set to use IPv6, an IPv6 ad-
dress can also be specified. The only symbols that can be used are
the dash (-) and period (.).
Port No. Type in the NTP server port number. (Range: 1 to 65535)
[Adjust] button Click this button to connect to the NTP server with the specified
conditions and adjust the time.