Konica Minolta bizhub C451 User Manual

Page 76

User mode

C451

2-41

If “Fax” was selected

Note

“Fax” appears if the optional fax kit has been installed.

If “IP Address Fax” was selected

Note

“IP Address Fax” appears if the IP address fax operation is available.

Item

Description

No.

Specify the registration number.
Select “Use opening number” or “Direct Input”. If “Direct Input” is
selected, type in the number. If “0” is specified, the user box is au-
tomatically registered with the next available number.

Name

Type in the name of the destination (up to 24 characters).

Index

Select the index characters for the destination. To normally display
the destination in the touch panel, check the “Main” check box.

Destination

Type in the fax number for the destination (up to 38 characters, in-
cluding only numerals, #, *, -, T, P and E).

Confirm Fax Number

Enter the fax number again in order to prevent misentering of the fax
number.
This menu item appears when “Confirm Address (Register)” is set
to [ON] from the control panel.

Line Setting

Select the line to be used (“No Selection”, “Line 1” or “Line 2”). A
setting can be selected if the optional fax multi line is installed.

Communication Setting

Click the [Display] button, and then select the check box for a dis-
played setting (“V34 Off”, “ECM Off”, “International Communica-
tion” or “Check Destination”).

Limiting Access to Desti-
nations

To specify the access level of the destination, click the [Display]
button. If an access permission group is specified for the user who
is logged on, the settings for “Search from Reference Allowed
Group” appear.
If “Search from Reference Allowed Group” is selected, click the
[Search from List] button, and then select an access permission
group from the list. If “Set direct Reference Allowed Level” is select-
ed, select a level.

Item

Description

No.

Name

Type in the name of the destination (up to 24 characters).