Konica Minolta bizhub C35 - Manual (Page 56)

bizhub C35 3-2
3.1 User Authentication Function 3
3 User Operations
3.1 User Authentication Function
When [Device] or [External Server] (Active Directory) is set for Authentication Method of the Admin Settings,
the User Authentication function implements authentication of the user of this machine before he or she ac-
tually uses it through the User Password that consists of 8 to 64 digits. During the authentication procedure,
the User Password entered for the authentication purpose appears as "*" or "
●" on the display. A failure in
authentication as a result of the entry of a wrong password is counted as unauthorized access.
The entry of a wrong password is counted as unauthorized access, even if it is not likely that the assets to be
protected will be affected during user authentication operations via application software. For detailed oper-
ating procedures, see the corresponding user’s guide.
NOTICE
Before operating the machine, the user him/herself should change the User Password from that registered
by the Administrator of the machine. For details of changing the User Password, see page 3-16. For more
details of User Name and User Password, ask the Administrator of the machine.
If the User Password is changed by the Administrator of the machine during operation of this machine, the
user him/herself should immediately change the User Password.
Make absolutely sure that your User Password is not known by any other users.
If the IC card function has been set by the Administrator of the machine, authentication using the IC card can
be performed, in addition to that based on entry of a user name and a user password.
Reference
- If authentication is to be performed by using the IC card, the Administrator of the machine should set
the IC card function and information recorded on the IC card be registered in the machine in advance.
For more details, contact the Administrator of the machine.
- Authentication using the IC card is enabled only when [Device] is selected.
- Authentication using the IC card is disabled, if it is performed from a device other than this machine,
such as printing from PageScope Web Connection or printer driver.
Authentication Method Description
None Uses no IC card for user authentication; a user name and a user
password are to be entered for authentication.
Card Authentication Uses an IC card for authentication, in addition to that based on en-
try of a user name and a user password.
Card Authentication + Password Uses an IC card placed on the IC card reader and entry of a user
password for authentication, in addition to that based on entry of
a user name and a user password.