beautypg.com

13 tcp/ip setting function, 1 setting the ip address, 2 registering the dns server – Konica Minolta bizhub C35 User Manual

Page 50: Tcp/ip setting function -36, Setting the ip address -36, Registering the dns server -36

background image

bizhub C35

2-36

2.13

TCP/IP Setting Function

2

2.13

TCP/IP Setting Function

When access to the machine by the Administrator of the machine through the Admin Settings is authenticat-
ed, the machine enables setting of the IP Address and registration of the DNS Server.

2.13.1

Setting the IP Address

0

For the procedure to call the Admin Settings on the display, see page 2-2.

0

Do not leave the machine with the setting screen of Admin Settings left shown on the display. If it is
absolutely necessary to leave the machine, be sure first to log off from the Admin Settings.

1

Call the Admin Settings on the display from the control panel.

2

Touch [

↓].

3

Touch [Ethernet].

4

Touch [TCP/IP].

5

Touch [IP Address].

6

Touch [Address] and set the IP Address.

7

Touch [OK].

8

Touch [OK] and touch [Close].

0

For the procedure to access the Admin Mode, see page 2-2.

0

Do not leave the machine with the Admin Mode setting screen left shown on the display. If it is abso-
lutely necessary to leave the machine, be sure first to log off from the Admin Mode.

1

Start PageScope Web Connection and access the Admin Mode.

2

Click the [Network] tab and [IPv4 Settings] from [TCP/IP Settings] menu.

3

Clear the Auto IP check box.

4

Enter the IP Address in the IP Address box.

% If Auto IP is selected from the IP Address Setting Method in step 3, select the means with which to

acquire the IP Address automatically, including DHCP, BootP, ARP/PING, and Auto IP setting, and
click the check box.

5

Click [Apply].

2.13.2

Registering the DNS Server

0

For the procedure to access the Admin Mode, see page 2-2.

0

Do not leave the machine with the Admin Mode setting screen left shown on the display. If it is abso-
lutely necessary to leave the machine, be sure first to log off from the Admin Mode.

1

Start PageScope Web Connection and access the Admin Mode.

2

Click the [Network] tab and [DNS Settings] from [TCP/IP Settings] menu.

3

Enter the address in the DNS Server box.

4

Make the necessary settings.

5

Click [Apply].