Konica Minolta bizhub C35 - Manual (Page 19)

bizhub C35 2-5
2.2 Enhancing the Security Function 2
2.2 Enhancing the Security Function
When access to the machine by the Administrator of the machine through the Admin Settings from the control
panel is authenticated, the machine enables setting of the Enhanced Security Mode that allows settings for
enhancing each of different security functions to be converted all at once.
In the Enhanced Security Mode, the machine allows selection of whether to use the Enhanced Security Mode
or not. When the Enhanced Security Mode is set to [ON], the security function is enhanced by automatically
setting such functions as that which determines whether each password meets predetermined requirements.
The following settings must first be made before the Enhanced Security Mode is set to [ON].
Setting the Enhanced Security Mode to [ON] changes the setting values of the following functions.
NOTICE
When Password Rules is set to [ON] the characters and the number of digits used for each password are
restricted. For details of the Password Rules, see page 1-8.
Turning ON the Enhanced Security Mode does not enable the ID & Print function. Enable the function man-
ually to protect image files. For details of the ID & Print function, see page 2-12.
Settings to be Made in Advance Description
Administrator Password An 8-digit password that meets the Password Rules.
The factory setting is "12345678."
User Authentication Set to either [Device] or [External Server] (Active Directory).
Certificate for SSL Register the self-signed certificate for SSL communications.
Password Rules Set to [ON].
Function Name Factory Setting When Enhanced Security Mode is set to [ON]
Public Access Restrict Restrict (not to be changed)
User List Display Setting OFF OFF (not to be changed)
SSL OFF ON (not to be changed)
SSL Encryption Strength AES-256, 3DES,
RC4-128,
DES, RC4-40 AES-256, 3DES (not to be changed to one containing
strength lower than AES/3DES)
FTP Server Enable Selection can be made between [Enable] and [Disable]
SNMPv1/v2c Read/Write en-
abled Only Read is enabled (not to be changed)
SNMP v3 Security Level
and auth-password/priv-
password
(SNMP v3 Write User) auth-password/
priv-password The security level can be selected from among [auth-
password] or [auth-password/priv-password].
An 8-digit-or-more auth-password or priv-password
can both be set.
Administrator Password
Change Via Network
(Pagescope Web Con-
nection) Enabled Restrict
Network firmware update
protect Invalid Valid
CS Remote Care Usable Remote device setting disabled
Telnet Enable Disable (not to be changed)