Konica Minolta bizhub C35 - Manual (Page 40)

bizhub C35 2-26
2.9 Erasing data when the machine is to be discarded or use of a leased machine is terminated 2
2.9.3 Setting the Restore All
The NVRAM is initialized and reset to the default state.
0 For the procedure to call the Admin Settings on the display, see page 2-2.
0 Do not leave the machine with the setting screen of Admin Settings left shown on the display. If it is
absolutely necessary to leave the machine, be sure first to log off from the Admin Settings.
0 For details of items that are cleared, see page 1-10.
1
Call the Admin Settings on the display from the control panel.
2
Touch [ ↓].
3
Touch [Restore Defaults].
4
Touch [Restore All].
5
A confirmation message appears. Touch [OK].
% Do not turn off the power switch of the machine during execution of Restore All. If the power switch
is inadvertently turned off during the execution of Restore All and the machine, as a result, develops
a fault, contact your Service Representative.