Hdd format, Upgrading of the firmware, Hdd format -11 upgrading of the firmware -11 – Konica Minolta bizhub C35 User Manual
Page 14
bizhub C35
1-11
1.5
Miscellaneous
1
HDD Format
Execute HDD format when, for example, to initialize the HDD (to be reset to the default state) or when the
HDD is replaced with a referent one. Executing HDD format deletes data saved in the machine’s HDD. Dif-
ferent types of data are deleted depending on the type of Format.
-
Executing [User Area Only] deletes the Secured Job file and ID & Print file.
-
Executing [User Area (Scan)] deletes the registered user information and Scan to HDD files.
-
Executing [All] formats all areas in the HDD, deleting all data saved. In addition, the formatting turns
[OFF] the Enhanced Security Mode. So, it must be turned [ON] again. For details of settings, see
page 2-5.
Upgrading of the firmware
If upgrading of the firmware has been performed by the service engineer, the Administrator of the machine
must execute [Restore All]. Execute [Restore All] after the firmware has been upgraded. For details of the ex-
ecution of [Restore All], see page 2-26.
-
For details of items of data to be cleared by [Restore All], see page 1-10.
-
The execution of [Restore All] will turn [OFF] the Enhanced Security Mode. So, it must be turned [ON]
again. For details of settings, see page 2-5.