Konica Minolta bizhub C35P - Manual (Page 303)

Configuring the Printer 7-84
Toner Out Specifies whether or not a notification is
sent when the toner is empty.
Choices: Enable, Disable
Default: Enable
Output Tray
Full Specifies whether or not a notification is
sent when the output tray has become
full.
Choices: Enable, Disable
Default: Enable
Fuser Unit End Specifies whether or not a notification is
sent when the fuser unit has reached the
end of its service life.
Choices: Enable, Disable
Default: Enable
Operator Call Specifies whether or not a notification is
sent when the operator must be called.
Choices: Enable, Disable
Default: Enable
Service Call Selects whether or not notification is sent
to the service representative when a con-
dition occurs that requires servicing.
Choices: Enable, Disable
Default: Enable
Job Complete Specifies whether or not a notification is
sent when a print job is completed cor-
rectly.
Choices: Enable, Disable
Default: Enable
Job Error Specifies whether or not a notification is
sent when a job could not be printed
because an error occurred.
Choices: Enable, Disable
Default: Enable
Item Description