Setting the address manually, Setting the address manually -5, Caution – Konica Minolta bizhub C35P User Manual

Page 184

Text mode
Original mode

Network Connection

6-5

Setting the Address Manually

You may also manually change the printer’s IP address, subnet mask, and
gateway by using the following instructions. (See Chapter 5 “Understanding
the Ethernet Configuration Menus” for more information.)

When manually setting the IP address, turn off DHCP, BOOTP and
ARP/PING first. In addition, when the IP address is changed, add a
new port or reinstall the printer driver.

CAUTION

You should always notify your network’s administrator before changing
the printer’s IP address.

Turn on your PC and printer.

When the printer’s message window displays

READY

, set the IP address.

Press this
key . . .

(until) the message window reads . . .

READY

PROOF/PRINT MENU

or if no optional hard disk kit

HD-P03

is installed:

PRINT MENU

INTERFACE MENU

JOB TIMEOUT

ETHERNET

TCP/IP