Konica Minolta bizhub C35P - Manual (Page 163)

Printing With NetWare 3-8
– Frame Type:
Select Auto. (Select the frame type according to the network envi-
ronment.)
– Mode: Select PServer.
– Print Server Name: Specify the print server name created in step
4.
– Print Server Password: Specify only when setting from the
Net-Ware server.
– Print Queue Scan Rate: Specify 1. (Change as necessary.)
– Bindery/NDS: Select NDS.
– Preferred NDS Context Name:
Specify the name of the context that connects to Pserver.
– Preferred NDS Tree Name:
Specify the name of the tree that Pserver logs on to.
6
Restart the printer (turn the printer off, then on again).
7
Use the NetWare server console to load MONITOR.NLM.
8
Select the connection information and, in the active connection column,
check that the created Pserver is connected.