Printer driver settings, Options installed, General – Konica Minolta bizhub C35P User Manual
Page 146: Printer driver settings -11, Options installed -11 general -11
Specifying Printer Driver Settings
2-11
Printer Driver Settings
Options Installed
General
Parameters
Settings
Paper Source Unit
Select Unit 3 if an optional lower feeder unit
PF-P09 for the printer has been installed.
The default setting is Disabled.
Storage
Select None, CF (1GB Over) or HDD for the
storage unit that is installed.
The default setting is None.
Duplex Unit
Select Enabled if the duplex unit for the
printer has been installed.
The default setting is Disabled.
Printer Memory
Select 256 MB, or 768 MB if an optional
memory for the printer has been installed.
The default setting is 256 MB.
Parameters
Settings
Nearest Size and Scale
If no paper tray contains paper of the speci-
fied size, the page is automatically enlarged
or reduced and paper of the most appropriate
size is selected.
The default setting is Off.
Resolution
Displays the image resolution (High Quality)
for printing.
Paper Type
Specifies the paper type as Printer Default,
Plain Paper, Recycled, Glossy, Glossy 2,
Label, Thick 1 (91 - 150g/m
2
), Thick 2 (151 -
210g/m
2
), Letterhead, Envelope, Post-
card, Single Side Only (60 - 90g/m
2
), or
Special Paper (60 - 90g/m
2
).
The default setting is Printer Default.