Konica Minolta Bizhub 215 - Manual (Page 64)

bizhub 215 7-4
7.1 How to scan originals 7
2
Connect a USB memory to this machine.
The machine mode changes to scan mode and [TO: Scan to USB Memory] is displayed.
% By pressing ,, file format, and compression coding method can be set. For details, refer to
page 7-6.
3
Press the Start key.
4
Press +,, then select [AUTO DETECTION] or [MANUAL].
% If [AUTO DETECTION] is selected, press OK and go to Step 8.
% If [MANUAL] is selected, scanning size can be selected. Press ) and go to Step 6.
5
Press +, to select desired scanning size, then press OK.
% By pressing [INCH] or [METRIC], the scanning size unit can be changed.
6
Press OK.
7
Check the content of setting, then press OK.
Scanning starts and [NEXT PAGE?] is displayed.
% When scanning multiple sheets of the original, set the next original on the Original Glass, then press
OK. Repeat the above procedure for all sheets of the original.
8
When all the originals have been scanned, press the Start key.
Storage starts.
Tips
- To stop scanning, press Clear/Stop.
- If you are unable to send data, the TX Result Report is output.