Konica Minolta Bizhub 215 - Manual (Page 20)

bizhub 215 3-5
3.2 TWAIN driver 3
[Scan Type]
A scanning method can be selected.
- [Pull Scan]: Click the driver [Scan] button, then this machine starts scanning.
- [Push Scan]: Press Start on the Control Panel, then this machine starts scanning.
[Image Size]
Displays the size of the scanned image.
[LAN/USB]
Connection method can be selected.
- If network is selected, an IP address can be set or changed by following procedures shown below:
1
Select [Network].
2
Enter an IP address to be newly registered or changed.
% Click [Search], then an IP addresses of devices connected to the network will be displayed. Select
the pertinent IP address, then click [OK].
3
When an IP address is set up, click [OK].
[About]
The version information screen appears.
[Scan]
Scan the original.
[Close]
Stops scanning.
[Clear]
Deletes images scanned using pre-scanning.
[Prescan]
Pre-scans the original and displays it in the pre-scan window.
[Unit]
Select a display unit from the drop-down list.
[Help]
The Help screen appears.