Konica Minolta Bizhub 215 - Manual (Page 56)

bizhub 215 6-3
6.1 Basic transmission method 6
3
Press Speed Dial and enter a 3-digit speed dial number (the number registered to the target FTP or
SMB server address desired for uploading) using the Keypad.
4
Press OK.
The destination is displayed.
% By pressing ,, the file format and transmission settings for the compression coding method can be
changed. For details, refer to page 6-6.
% Specify the speed dial number to be within the range of [251] to [300].
% An error message will appear if nothing is registered for a specified speed dial number. Enter the
speed dial number again.
5
Press the Start key.
Scanning/sending starts.
Tips
- To stop scanning, press Clear/Stop.
- If you are unable to send data, the TX Result Report is output.
d
Reference
To cancel transmission of scanned data while standing by for transmission, press Function and select [CAN-
CEL RESERV.]. For details, refer to [User's Guide Fax Operations].
Loading double-sided originals
1
Load the original.
% For details on how to set the original, refer to [User's Guide Fax Operations].
2
Press Simplex/Duplex.
A screen for specifying Simplex/Duplex appears.
3
Select [1-SIDE] or [2-SIDE] using +,, then press OK.
% When you select [2-SIDE] and press ), you can specify the binding direction of the original. Select
[LEFT] or [TOP], then press OK.
Tips
- The binding direction can be set only when you select [PDF] for the file format.