Konica Minolta PageScope Direct Print - Manual (Page 20)

Specifying Printer Settings 4
PageScope Direct Print 4-3
4 Select the printer to be used, and then click the [Add] button.
If the listed printers cannot be used or to specify manual settings,
select “Manual Setting”, and then click the [Add] button.
The Printer Setting dialog box appears.
5 Specify the printer name and the various settings on the “Network”,
“User Authentication/Account Track”, and “Configure” tabs, and then
click the [OK] button.
H In the “Printer Name” box, type in the name of the printer.
H To print a test page, click the [Print Test Page] button.
4.1.1 “Network” tab
IP Address
For a printer that was detected, the IP address of the printer appears.
For a manual setting, type in the IP address of the printer.
Check with the network administrator for the IP address of the printer.
Port Number
Type in the port number for the printer.