Konica Minolta PageScope Direct Print - Manual (Page 18)

Specifying Printer Settings 4
PageScope Direct Print 4-1
4 Specifying Printer Settings
4.1 Adding a Printer
A printer can be added to the “Registered Printers/Job Settings” list in the
main window. With PageScope Direct Print, multiple printers can be
registered.
In addition, printers can be added manually if they could not be detected
when PageScope Direct Print was installed.
Note
Check that the printer to be used is connected to a network, and then
make sure that the printer is turned on.
Operating procedure
1 Start up PageScope Direct Print.
The main window appears.
Note
If no printer could be detected when PageScope Direct Print is
installed, the dialog box shown in step 3 appears. Either perform
the operation described in “Specifying printer search parameters”
on page 4-7, or skip to step 4.
2 Select “Available Printers” in the “Registered Printers/Job Settings”
list.