Aiwa NSX-HMT25 - Manual (Page 4)

4
ENGLISH
PREPARATIONS
1
Connect the front speakers.
The speaker placed on the right side of the unit facing you
is “the right speaker” and another one is “the left speaker”.
The cord with white stripe should be connected to 0
terminals and the other cords to 9 terminals.
Be sure to connect the speaker cords correctly. Improper
connections can cause short circuits in SPEAKERS terminals.
2
Connect the surround speakers.
Connect the surround speaker cords to SURROUND
SPEAKERS terminals.
3
Connect the center speaker.
Connect the center speaker cord to CENTER SPEAKER
terminal.
CONNECTIONS
Before connecting the AC cord
The rated voltage of your unit shown on the rear panel is 120 V
AC. Check that the rated voltage matches your local voltage.
IMPORTANT
Connect the speakers, antennas, and all optional equipment first.
Then connect the AC cord.