Konica Minolta bizhub 750 - Manual (Page 50)

Scanning Documents 2
bizhub 750/600 2-15
Scan
nin
g
Do
cu
men
ts
Chapter 2
To search the destination
1
Touch [Scan Settings], and then specify the scan settings.
– For details on the scan settings, refer to “Specifying the Scan Set-
tings” on page 2-43.
2
After specifying the settings, touch [OK].
3
Load the document into the ADF or position it on the original glass of
the machine.
4
Press the [Start] key on the control panel.
The document is scanned, and the data is sent.
2
Note
Do not turn off the machine until the scanned jobs disappear from the job
list.