Konica Minolta bizhub 750 - Manual (Page 252)

Specifying Settings From the Control Panel 3
bizhub 750/600 3-131
Sp
ec
ifyin
g
Set
tin
gs
F
ro
m
th
e
Co
nt
ro
l Pa
ne
l
Chapter 3
3.34 TCP Socket Setting
You can specify the TCP socket settings. The TCP socket is used for the
computer programs and the data transmission of this machine.
The settings that can be specified are described below.
TCP Socket Setting screen 1/2
TCP Socket Setting screen 2/2
To specify the TCP socket settings
1
In the Administrator Setting screen, touch [5 Network Setting].
2
In the Network Setting screen, touch [Fwd. →], and then touch [3 TCP
Socket Setting].
TCP Socket Setting screen 1/2 appears.
3
Specify the desired settings.
Item Description
TCP Socket Setting Select whether to use the TCP socket setting. If “OFF” is
selected under “TCP Socket Setting”, some of the pro-
grams on your computer may not be usable.
Port Number Specify the port number that is used. To change the value,
press the [C] (clear) key, and then use the keypad to type in
the value (between 1 and 65535).
Item Description
TCP Socket (ASCII Mode) Select whether to use the TCP Socket (ASCII Mode) set-
ting.
Port Number (ASCII Mode) Specify the port number that is used with the ASCII mode.
To change the value, press the [C] (clear) key, and then use
the keypad to type in the value (between 1 and 65535).