Konica Minolta bizhub 750 - Manual (Page 101)

2 Scanning Documents
2-66 bizhub 750/600
Scan
nin
g
Do
cu
men
ts
Chapter 2
4
Specify the width to be erased.
– To erase all sides with the same width, touch [Frame] and enter the
value.
– To specify the width separately for the top, left, right, and bottom
sides, touch the corresponding button and enter the value. To
specify that no area is erased, touch [None].
– For North American users, touch [ ⇔] to switch between the integer
and the fraction.
5
Touch [OK], and then touch [OK] in the next two screens that appear.
Center Erase (Application)
When scanning a page spread, the shadow of the binding at the center can
be erased.
The width of the erased area can be set between 0.1 and 30.0 mm.
1
Touch [Scan Settings] in the Scan mode screen.
2
Touch [Application].