Konica Minolta magicolor 4690MF - Manual (Page 200)

Network Connection 184
Setting the Address Manually
You may also manually change the printer’s IP address, subnet mask, and
gateway by using the following instructions. (See chapter 5, “Understanding
the Network Configuration Menus,” for more information.)
"
When the IP address is changed, add a new port or reinstall the
printer driver.
CAUTION
You should always notify your network’s administrator before changing
the printer’s IP address.
1
Turn on your PC and printer.
2
After the machine’s message window is initialized, set the IP address.
Press this
key . . . (until) the message window displays . . .
UTILITY
MACHINE SETTING
ADMIN. MANAGEMENT
Use the keypad to input 6-digits administrator number.
ADMINISTRATOR NO.
NETWORK SETTING
TCP/IP
IP ADDR. SETTING
) AUTO
SPECIFY
AUTO
) SPECIFY
IP ADDRESS
:0. 0. 0. 0