Konica Minolta magicolor 4690MF - Manual (Page 192)

ADMIN. MANAGEMENT Menu 176
DNS CONFIG.
"
When using network scanning and when specifying the SMTP server
as a host name instead of as an IP address, be sure to select
ENABLE , and then specify the IP address of the DNS server.
Purpose Sets whether or not the DNS server setting is to be speci-
fied.
If specifying the DNS server setting, the SMTP server can
be specified as a host name when using network scanning.
If ENABLE is selected, type in the IP address of the DNS
server.
If DISABLE is selected, the DNS server cannot be refer-
enced.
Options
DISABLE/ENABLE
Default
DISABLE
Range (If DNS CONFIG. is set to ENABLE)
0-255 for each xxx triplet
Use the keypad to input each number; use the * and )
keys to move between triplets.
Notes A single digit number, such as “1”, cannot be input as “001”.
Align the number on the left and input “1” as “1 _ _”. Use
the * and ) keys to move between triplets.
The Back key can also be used for deleting. To cancel DNS
CONFIG. menu, hold down the Back key for more than
one second, and then press the Back key again after all
settings have been cleared.
After changing the settings, the printer must be turned off,
then on again.