Konica Minolta KIP 600 Scanner - Manual (Page 66)

Section 2 Copy Mode - Monochrome 2-28
2.8.4 Auto Zoom
Press the Auto Zoom bottom to enable this function. Auto Zoom features works in
conjunction with the roll selected to scale the image to the selected roll width.
a)
If a roll is selected in the Media region the
zoom from the original will automatically fit the
width of the selected roll.
b)
If a roll is not selected (Auto is currently
selected), roll selection is requested prior to
the function of Auto Zoom. If cut sheet is
used then it will use the values set in the Cut
Sheet button in Media.
2.8.5 Clear
To reset the percentage value to default, press the
“C” button.
2.9 Start
The copier is always set to “Auto Start”. That is when an originally is
inserted into the KIP 600, it will start without other user intervention.
The start button is used when a job is recalled. The start button will “start”
the job if depressed after ‘Recall”. (The name will change to “Re-print”)
2.10 View Last
The last documented scanned to be copied be viewed.
2.11 Recall Job
The last set or single copy can be recalled to be resized or to switch
media type. After a job is recalled, make the required changes and then
press “Start”.