Konica Minolta KIP 600 Scanner - Manual (Page 59)

Section 2 Copy Mode - Monochrome 2-21
Select desired settings from the main copy screen. Feed your original (s) into the
KIP 600.
c) Prepare Cut Sheet Feeder on your printer and WAIT until prompted by the UI.
d) Insert the media into the Cut Sheet Feeder.
Note:
Only one cut sheet may be fed at a time and this function will time out after 3
minutes if no paper is inserted.
Note:
DO NOT insert the cut sheet media into the feeder while printing from a roll deck,
as this may cause the printer to jam.
2.6.5 Media Remaining
The installed roll information is displayed in the button of the particular roll deck.
Beside each deck is a volume of media that currently is left on the roll of media.
Indicators will display full, ¾, ½, ¼ or empty.