beautypg.com

Warning – Konica Minolta KIP 600 Scanner User Manual

Page 4

background image

(3)

WARNING

1. The power source should be as follows:

100-120VAC/200-240VAC, 50/60Hz, 1A or higher

2. Use a circuit with a dedicated breaker.
3. Install the machine as close to the wall outlet as possible.
4. If you want to move the machine, contact your service personnel.

Ground the machine with a correct ground source or you may be
electrically shocked.

1. Do not plug in the machine into a multi-wire connector in which some

other equipment is plugged into.
It may cause a fire due to outlet overheating.

2. Do not damage the power cord by stepping on or placing heavy objects

on it.
If the power cord is damaged, it may cause a fire or you may receive an
electrical shock. REPLACE THE CORD IF DAMAGED!

1. Do not put a flower vase, a flowerpot or any water-filled objects on the

machine.
Spilt water could cause a fire or an electrical shock.

2. If the machine generates an unusual smell or noise, turn it off and

unplug it from the wall electrical outlet immediately.

1. Do not remove the screw and do not open the cover if not said to do so

in this User’s Manual. If you ignore this warning, you may be burnt or
receive an electrical shock due to a hot part or electrically charged part
inside.

2. Do not disassemble or tamper with the machine.

It may result in a fire or an electrical shock.

Be sure to catch the plug when you unplug the machine.
Otherwise, you may damage the power cord and may result in a fire or an
electrical shock.