Konica Minolta KIP 600 Scanner - Manual (Page 11)

Part 1 Basic Functions 1-5
1. 4 Specifications
Model KIP 600A
Scanning method Sheet through type
Reading sensor Contact Image Sensor
(for A4 size x 5 pieces in staggered arrangement)
Light source LED (R/G/B)
Setting Face up
Starting point of scan Center
Original width 11 - 36” / 257 - 914mm
Original thickness 0.05 - 1.6mm
Margin 3.5 to 4.5mm from leading / trailing edge
Color mode Monochrome : Binary
Grayscale
: 4 bit / 8 bit
Color : 24 bit
Scanning speed
(on 600 dpi) Monochrome : 65mm/s
Grayscale :
65mm/s
Color : 22mm/s
Resolution 600dpi
Interface
USB 2.0 (Maximum: 5VDC)
Input power Voltage: 100 - 240VAC
Current: 1A (at 100V)
Frequency: 50/60Hz
Power consumption 60W maximum
Environmental conditions 10-32 degrees centigrade, 20-80%RH (Non condensing)
Acoustic noise 60 db or less (during 65mm/s scan operation)
Outer dimension 1,097mm (Width) x 408mm (Depth) x 170mm (Height)
or 43” (Width) x 16” (Depth) x 7” (Height)
Weight Approximately 26kg (57.4 lbs)
NOTE
These specifications are subject to change without notice.
NOTE
KIP 600A accepts the inlet voltages of 100 to 240VAC
without additional voltage transformation.