beautypg.com

Konica Minolta bizhub C250 User Manual

Page 324

background image

Appendix

13

Network Fax

13-9

Appe

nd

ix

Ch

apt

e

r 13

M

Manual trans-

mission

This operation to send documents while con-

firming the status of the receiving machine.

Memory

The location to store data. It is used to spec-

ify the communication or store the docu-

ment.

Memory over-

flow

The state of the fax image memory in this ma-

chine to be full during storing transmitted

document.

Memory RX

The function to store the received document

and print the document as necessary.

Memory Sub-

stitute Recep-

tion

The function to store transmitted document

in the memory automatically when the re-

ceived document cannot be printed due to

the machine being out of paper.

Memory trans-

mission

In this transmission method, all pages being

sent are first scanned and stored in memory

before transmission. The document is auto-

matically numbered by total page number,

and the images on the first page are shown

on communication results report.

However, when a large number of pages are

sent or when the images on the originals are

fine, memory capacity may be exceeded due

to the large amount of data stored in memo-

ry.

Mixed Original

The function to set and send document pag-

es of mixed sizes by a single sequence of op-

erations.

O

Original size set The function to designate the paper size for

the document to be sent. Normally, when the

paper size loaded at the destination is too

small to accommodate the image being

transmitted, the original image will be re-

duced to fit the paper size. This feature gives

you the option printing a portion of the image

with no reduction.

Originating sta-

tion

The facsimile to provide instruction to send

document to multiple stations.

Overseas TX

The international communication. In Over-

seas TX, a lower baud rate will be employed.

Select this mode if you send a fax to the lo-

cation at which the communication condition

is poor even if it is in your country.

Terms

Description

This manual is related to the following products: