Konica Minolta bizhub C250 - Manual (Page 225)

10 Utility Mode
10-48 Network Fax
Utility Mode
Chapter 10
Header/Footer Position
1
Open the Administrator Setting screen (See "Entering Administrator
Setting" on page 10-3).
2
Press [Fax Setting].
– Some items may not be displayed depending on the optional
settings.
– In the Utility Mode, it is also possible to enter a number displayed
in the key through the keypad for selection. In the case of [Fax
Setting], enter 8 through the numeric keypad.
3
Press [Header/Footer Position].
4
Select the item you wish to set.
– To close the Utility Mode screen, press [Exit] in the sub-area.