13 network fax function settings, Network fax function settings, 13 network fax function settings -38 – Konica Minolta bizhub C250 User Manual
Page 215
10
Utility Mode
10-38
Network Fax
Utility Mode
Chapter 10
10.13 Network Fax Function Settings
Set items related to the network fax.
*
indicates factory default setting.
2
Note
To use the IP Address Fax function, a fax kit is required optionally.
For details of the optional fax kit, contact your service representative.
Network Fax Function Settings
1
Open the Administrator Setting screen (See "Entering Administrator
Setting" on page 10-3).
2
Press [Network Setting].
–
Some items may not be displayed depending on the optional
settings.
–
In the Utility Mode, it is also possible to enter a number displayed
in the key through the keypad for selection. In the case of [Network
Setting], enter 5 through the numeric keypad.
Item
Description
Available value
Network Fax
Function Set-
ting
IP Address Fax
When the IP Address Fax is
used, a setting is made to ON.
ON / OFF
*
Network Fax
Function Set-
ting
Internet Fax
When the Internet fax is used, a
setting is made to ON.
ON / OFF
*