Konica Minolta bizhub C250 User Manual
Page 140
Transmission Applications
7
Network Fax
7-25
Tr
ansmission
Ap
plicat
ion
s
Chapter 7
–
Refer to p. 3-46 for more information about Sender Information.
–
If the Header Information is set to [OFF], by changing the [Header
Setting] to ON from the Fax screen, Header Information is added to
the [Outside Body Text].
5
When changing the name of a sender, press [ON] in [Change Sender
Name]. Then select the name of a sender you want to change from the
list and press [OK].
–
See "Header Information" on page 10-44 for setting the Header
Setting.
6
Press [OK].
The Scan Setting screen will be restored.
7
Press [OK].
The FAX screen will be restored.
8
Set other functions if necessary.
–
See "Setting Transmission Conditions" on page 3-16 for
information about setting functions in the FAX screen. See
"Application Functions Overview" on page 7-4 for information
about setting functions in the FAX Application screen.
9
Designate the destination.
–
See "Method for Specifying Addresses" on page 3-24 for
designating the destination.
10
Set the original document.
–
See "Placing the Original on the Machine" on page 3-9 for
information about setting the document.
11
Press [Start].
Transmission begins.