beautypg.com

List of ldap settings – Konica Minolta bizhub 25e User Manual

Page 70

background image

1

2

Management

Specifying the network settings 2-23

„

List of LDAP settings

Item

Description

Name

This is the button name displayed on the screen. Up to 23
characters can be entered.
If nothing is registered, the first 23 characters of the LDAP
server address is displayed instead.

LDAP Server Address

Enter the name or IP address of the LDAP server to register.
Up to 99 characters can be entered.

Port Number

Enter the port number of the LDAP server.
A number between 0 and 65535 can be set, and the default
value is 389.

Authentication Method

Select the authentication method to log in to the LDAP server
from [Anonymous], [Simple] or [DIGEST-MD5].
The authentication method must match that used in the LDAP
server.
If [Anonymous] is selected, [OB User Login], [Account ID],
and [Password] can be omitted.

MB User Login

Set whether to use the Message Board user information when
a login is required to access the LDAP server.
When this setting is enabled, if you register the LDAP server
authentication account and password in the user registration
of Message Board, it is not necessary to enter an account and
password at LDAP searching.
If [OB User Login] is set to ON, [Account ID] and [Password]
can be omitted.

Account ID

This setting is required when the authentication method is set
to Simple or Digest-MD5, and OB User Login is set to OFF.
If you do not register an account ID, the system prompts you
to enter the account ID at LDAP searching.
Up to 49 characters can be entered.

Password

This setting is required when the authentication method is set
to Simple or Digest-MD5, and OB User Login is set to OFF.
If you do not register a password, the system prompts you to
enter the password at LDAP searching.
Up to 29 characters can be entered.

Search Base

Enter the starting search position of the LDAP server.
Up to 99 characters can be entered.

MaxNumber of results

Set how many search results to display. An error is displayed
when the number of search results exceeds the maximum.
A number between 1 and 100 can be set, and the default value
is 50.

Time Limit

Set the maximum amount of time until the search results
are displayed. An error is displayed when the time taken for
search results exceeds the maximum. A number between 0 and
9999 seconds can be set for the time, and the default value is 0
(unlimited).

Optional Setting

You can add search conditions to the parameters.

Additional Attribute Enter the search condition attribute to add.

Up to 49 characters can be entered.

Additional String

Enter the search condition value to add.
Up to 99 characters can be entered.

Search Method

Select the search method.