Konica Minolta bizhub 25e - Manual (Page 35)

1-22 Specifying default settings
List of default settings
Function Description Settings
Default Mode You can set the ready screen when power is turned
ON and when the specified auto reset time has
elapsed. Copy
Scan
Fax
Print
My MFP
Auto Reset
Time •Copy Screen
•Scanner Screen
•Fax Screen
•Printer Screen
•My MFP Screen
You can set the time until each screen returns to
the ready screen or the machine operation when it
has finished scanning.
Automatic Reset Time:
You can set the time how long it takes to return
to the ready screen when the machine is left idle.
Reset After Scan *1 :
When this setting is enabled, all settings are
reset when the document is scanned.
Logout After Scan *2 :
When this setting is enabled, users are logged out
when the document is scanned.
Automatic Reset Time
1-10 Minutes: 3 Minutes
Reset After Scan
OFF
ON
Logout After Scan
OFF
ON
Copy Settings You can set the default values for the copy mode,
such as the document type and contrast for the
documents to be copied.
For details, see chapter 3, “Specifying default
settings” in the Copier Guide.
Scanner
Settings You can set the default values for the scanner
mode, such as the document type and contrast for
the documents to be scanned.
For details, see chapter 7, “Specifying default
settings” in the Scanner and Fax Guide.
e-mail Settings You can set the default settings for templates, and
the file format for the scan to e-mail function.
For details, see chapter 7, “Specifying default
settings” in the Scanner and Fax Guide.
Fax Settings You can set the default values for the fax mode,
such as the resolution and contrast for the
documents to be faxed.
For details, see chapter 7, “Specifying default
settings” in the Scanner and Fax Guide.
Printer
Settings You can set the default values for the printer mode,
such as the printer controller settings and the auto
deletion time setting for security printing.
For details, see chapter 4, “Operating on control
panel” in the Printer Guide.