Konica Minolta bizhub 501 User Manual
Page 195
501/421/361
1-182
Setup items by operation
1
When "No Destination" was selected using [Registration]
Page Setting
Specify the unit of data to be saved.
Subject
Specify the E-mail subject.
To use the default subject, select "Not Specified". To check the contents of the subject,
click [Subject List].
Text
Specify the E-mail text.
To use the default subject, select "Not Specified". To check the contents of the subject,
click [Text List].
Simplex/Duplex
Specify whether the original is 2-sided.
Original Type
Specify the quality of the original, such as text or photo.
Separate Scan
Specify whether to divide scanning of the original.
Density
Specify the density.
Background Removal
Adjust the density of the background.
Scan Size
Specify the original size ("Auto", "Standard Size" or "Custom Size").
If "Standard Size" is selected, select the size and the feed direction. If "Custom Size" is
selected, specify the height and width.
Application Setting
Click the [Display] button, and then specify settings for the functions that are displayed.
E-mail Notification
Specify whether to send notification of scan data URL. Specify the notification address
for "Address". To select a destination from the list, click [Search from List].
Timer TX
Specify whether to perform timer communication. If yes, enter the transmission time.
Password TX
Specify whether to send the password. If yes, enter the password.
F-Code
Specify whether to send the password using F code. If "Enable" is selected, type in the
SUB address and password.
Original Direction
Specify the original orientation.
2-Sided Binding Direc-
tion
Specify the binding orientation of the original.
Stamp
A setting is made to decide whether the Stamp Setting is turned ON or OFF.
Special Original
Specify the original in a different size.
Book Scan
Specify whether to perform book scan.
Erase
Specify whether to perform frame erase.
Neg./Pos. Reverse
A setting is made to decide whether or not a reversal is made between the white section
and the black section in the original.
Compose
(Date/Time)
Specify whether to print the date/time.
If yes, specify settings for "Date Type", "Time Type", "Print Position", "Fine-Tune", "Pag-
es", and "Size".
Compose
(Page)
Specify whether to print page numbers.
If yes, specify settings for "Page Number", "Chapter", "Print Position", "Fine-Tune", and
"Size".
Compose
(Header/Footer)
Specify whether to print a header/footer.
If yes, specify the registration number of the header/footer. To check the registered head-
er/footer, click [Confirm Registered Contents].
Compose
(Stamp)
Specify whether to print the stamp.
If yes, specify settings for "Preset Stamp" or "Registered Stamp", "Print Position", "Fine-
Tune", "Pages", and "Size". To check the registered stamp, click [Confirm Registered
Contents]. To use the registered stamp function, stamps must be registered from the con-
trol panel in advance.
Stamp Combine Method
Specify the stamp composition method.
Limiting Access to Desti-
nations
Click [Display], and then specify the group that is allowed to access a destination and ref-
erence allowed level.
Item
Definition
Item
Definition
No.
Displays the registration number.
Name
Type in the registration name (up to 24 characters).
Resolution
Specifies the resolution.
File Type
Specify the file format.