beautypg.com

Konica Minolta bizhub 501 User Manual

Page 175

background image

501/421/361

1-162

Setup items by operation

1

When "Bulletin Board User Box" is selected

When "Relay User Box" is selected

When "Annotation User Box" is selected

!

Detail

If "Password Rules" is enabled, no password containing less than eight characters can be registered.
If you have already registered a user password containing less than eight characters, change it to one
using eight characters before enabling "Password Rules". For details on the password rules, refer to
the User’s Guide [Copy Operations].

Item

Definition

User Box Number

Specify the registration number of the box to be created ("Use opening number" or "Direct
Input").

User Box Name

Specify the user box name (up to 20 characters).
To specify the user box password, select the "Use Box Password" check box, and then
specify the password (up to 8 characters).

Type

Specify the user box type. Public user boxes can be created only, and they cannot be
changed in Administrator mode.

Auto Delete Document

Specify the period during which data in the user box is saved.

Item

Definition

User Box Number

Specify the registration number of the box to be created ("Use opening number" or "Direct
Input").

User Box Name

Specify the user box name (up to 20 characters).
To specify the user box password, select the "Use Box Password" check box, and then
specify the password (up to 8 characters).

Relay Address

Specify the relay address.

Relay TX Password

Specify the relay TX password (up to 8 characters).

Retype Relay TX Pass-
word

Type in the relay TX password again.

Item

Definition

User Box Number

Specify the registration number of the box to be created ("Use opening number" or "Direct
Input").

User Box Name

Specify the user box name (up to 20 characters).
To specify the user box password, select the "Use Box Password" check box, and then
specify the password (up to 8 characters).

Auto Delete Document

Specify the period during which data in the user box is saved.

Count Up

Select the counting method. If the user box contains documents, the setting cannot be
specified.

Stamp Elements

Specify settings for "Primary Field", "Secondary Field", "Date/Time Setting", "Print Posi-
tion", "Density", and "Number Type"

This manual is related to the following products: