Pc-fax rx settings, Tsi user box setting, Pc-fax rx settings -25 tsi user box setting -25 – Konica Minolta BIZHUB C360 User Manual
Page 221: Ting] (p. 10-25), Ing] (p. 10-25
bizhub C360/C280/C220
10-25
10.4
Administrator Settings (G3)
10
PC-Fax RX Settings
Specify whether to use the PC-Fax RX function. To use the function, configure the following items.
If two units of the Fax Kit FK-502 are installed, and [Individual Receiving Line Setup] is set to [ON] in Admin-
istrator Settings, you can select either [Fax Line 1] or [Fax Line 2] to configure settings for each line. For details
on [Individual Receiving Line Setup], refer to page 10-19.
Reference
-
The documents received by fax are saved in the TIFF format in a User Box.
d
Reference
For details on PC-Fax RX, refer to page 7-3.
TSI User Box Setting
Specify whether to use the TSI User Box function. To use the function, configure the following items.
If two units of the Fax Kit FK-502 are installed, and [Individual Receiving Line Setup] is set to [ON] in Admin-
istrator Settings, you can select either [Fax Line 1] or [Fax Line 2] to configure settings for each line. For details
on [Individual Receiving Line Setup], refer to page 10-19.
d
Reference
For details on the TSI User Box function, refer to page 7-4.
Item
Description
[Receiving User Box
Destination]
You can specify destinations in a Memory RX User Box or a Specified User
Box. If [Specified User Box] is selected, destinations are saved in a User Box
specified with an F code subaddress.
[Print]
Specify whether to print a fax after receiving.
[Password Check]
Specify a communication password (up to 7 digits).